In Walls

After squirting a fair amount of "good stuff" expanding foam into the nooks and crannies of the corrugated steel walls, I got Hubby to install the electrical (using the old pool circuit) to my specs; 6 outlets, one switched, one with USB ports, two halogen sconces, and a ceiling fan to compliment the small A/C unit I installed and the ceramic wall heater to come. (Don't forget to put nailplates over the wiring that crosses studs—I did it after the picture.)

Once the wiring was in, insulation went up. I needed one big batt and one small roll, using every bit. I'm not using roll insulation in the space that will be behind the door, that will be a very shallow closet. I stapled up silvered bubble-wrap kind of stuff (you can see the roll at left) that I will also use on the ceiling.